86-010-56290047
B2-12S Chengming Building, Xizhimen, Xicheng Dist., Beijing, China (Mainland)
USB to UART Module USB Beacon sniffer scanner
Governor with sniffer :
The External Antenna AprilBeacon sniffer 502 is a USB device that runs on Bluetooth 4.0 Low Energy.
It works with USB 2 TTL. You must plug it to a PC. It communicate with PC through virtual UART port. For example: You input "AT+SCAN?" to the UART port RX It will response the beacons information nearby like this:
OK+SCAN1 OK+SCAN:7C669D9B4A82,E2C56DB5DFFB48D2B060D0F5A71096E0,0,0,-58,-82,100 OK+SCAN:883314E55A42,E2C56DB5DFFB48D2B060D0F5A71096E0,2,8,-57,-75 OK+SCAN:0017EA915E24,E2C56DB5DFFB48D2B060D0F5A71096E0,1,8,-58,-72,100 OK+SCAN:C4EDBA567941,E2C56DB5DFFB48D2B060D0F5A71096E0,0,0,-58,-72 OK+SCAN:20CD3999087E,E2C56DB5DFFB48D2B060D0F5A71096E0,1,6,-65,-69,100 OK+SCAN:20CD39B093B1,E2C56DB5DFFB48D2B060D0F5A71096E0,0,0,-58,-84,86 OK+SCAN0The response will contains mac address, proximityUUID, major, minor, measured power, RSSI etc....
ABSniffer 502 work with raspberry pi, please refer to the pictures .
| Bluetooth |
|---|
| Version | 4.0 (Bluetooth Low Energy) |
| Security | Secure Simple Pairing and AES-128 |
| BR/EDR connections | 0 |
| Radio | Frequency 2.402GHz to 2480GHz |
| Modulations | GFSK |
| Transmit Power | +0 dBm |
| Receiver sensitivity | -93 dBm |
| Typical line-of-sight range | 10 – 30 meters |
| Antenna | External |
| Hardware | |
| Host interfaces | USB (USB/CDC) |
| Communication Protocol | TTL |
| Baud Rate | 115200 |
| Data Bit | 8 |
| Parity Check | No |
| Stop Bit | 1 |
| Scan duration | 4 seconds |
| Active Scan | No |
Contact:Julia Zheng
Skype:
Tel: 86-10-5629 0047
Technical forum:
